 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MPD-425V 250W DC-DC Power Supply Input Range: 40~57VDC 2.0 11.0 TO SWITCH Power Supply 0.42 0.35 0.4 DC OUTPUT WIRES Specifications * Input Voltage: 40~57VDC * Input Current: Max. 8A at 48VDC * Inrush Current: Does not exceed 10A at 48VDC input, cold start at 25oC * Ripple and Noise: < +/-1% peak to peak ripple and noise for each output * Line Regulation: < +/-1% at rated load with +/-10% change in input voltage * Load Regulation: +/-4% for +5V, +/-5% for +12V, +/-3% for -12V and -5V * Power Good Signal: Goes high 100~500ms after all DC output are ready * Power Failure: Goes low 1ms before any DC output falls * Efficiency: 70% typical at nominal line and rated load * Altitude: 10,000 feet * Protection: Input: Protection against wrong polarity if 48VDC input is inversely connected by mistake Output: Built-in over voltage protection. Trip point of crowbar circuit is between 5.9~7.0V. Hiccup mode against short circuit or over load conditions auto recovery when faulty conditions are removed * Temperature: 0~50oC (operating); -40~+75oC (storage) * Humidity: 5~95%; non-condensing at 40oC (operating) * Connectors: Input: Three positions terminal block DC Output: Output provides one AT type P8/P9 and two disk drive connector To Switch: Female disconnects for tab size 0.250" x 0.032" * Dimensions: 14.0 x 15.0 x 8.62 cm with +/-0.8mm and +/-0.4mm tolerance between mounting holes * MTBF: 178,042 hrs. 14.4 14.0 13.8 4-TAPPING #6-32 2.7 24V0V 0.5 6.4 1.6 0.5 11.5 Pin 1 2 3 Input 48VDC 0V GND Pin Red Yellow Brown Blue Black White Output +5V +12V -12V -5V GND P.G. Output +5V +12V -12V -5V Min. Load 1A 0A 0A 0A Rated Load 25A 10A 1A 1A Max. Load 30A 12A 2A 2A Tolerance +/-0.1V +/-0.72V +/-0.6V +/-0.25V 0.6 4.8 2.4 8.0 8.62 Safety Standards * Safety: UL 1950, CSA 22.2 No.234, VDE EN 60 950 * EMI: FCC Class B, EN55022B * EMS: Level 3 of IEC-801, 802 |
Price & Availability of MPD-425V
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |